WTC Machinery Auto Luber

Engineered to Perform.  Built to Last.

Auto Luber

The WTC Machinery Auto Luber is the easiest, most accurate way to test and lubricate the track pin and bushing joints used on bulldozers, excavators, and other crawler equipment.

The single-button Automated Testing Cycle includes Pressure, Vacuum, and Fill Cycle Tests, with 10-second test vacuum and pressure tests, for a thorough testing of the track seals.  The WTC Auto Luber freatures an easy to read display that clearly shows the progress of the testing, as well as the results.

The Auto Luber includes a Mobile Cart, so it can also fill rollers, idlers, and do other lubricating tasks.  The WTC Auto Luber is able to be coupled with a number of lubricant tank sizes, from a 10 gal tank up to a 55 gallon drum.

120VAC 60Hz 1-Phase-9.7 Amps or 220VAC 50Hz 1-Phase-5.5 Amps
Air Supply:
80 – 120 psi (5,5 – 8,3 Bar) 4.0 scfm (0.06 m3/min)
Lubricant Capacity:
55 gallon (208.2 L) or 15 gallon (56.8 L)
Dry Weight:
300 lb (136 kg)
67"H x 26.25"W x 46.5"L

Optional needles for lubricating track chains

 Reference image for needle types

Blunt Needle - normally used for CAT track
Rounded Tip - small diameter normally used on JD and Komatsu track
Sharp Tip - normally used on seals that are self-sealing (Sorefa)
Shaft of needle has two diameters and an open tip