W1222 Linden Road   Ixonia, WI 53036
Phone 1.800.248.8405 or 262.567.3993
Fax 262.569.4850
1-Hold Down Clamp, hydraulically operated, securely locks track link in position. Maintains alignment. Eliminates 
locking and deflection. Reduces tool breakage and link damage(Optional on WTC 250)
2-Safety Door
3-Large Dia. Cylinder (not shown on picture)  operates low pressure. Indirect connection between cylinder rod 
and tooling ram block eliminates all side loading on cylinder rods, packing and seals.
4-Jaws are securely held by tappered locks and hold down bolts. Adapters available for all popular styles of jaws.
5-Tool Mounts allows precise adjustment in all directions. Changes are fast and simple. Ram blocks are carried in
bronze ways with wiper seals. Precise aligment is maintained under maximum working loads. Will adapt to all popular
styles of tooling.
6-Ram Controls
Model WTC-250sf / 360sf Track Presses
(Model 250 P/N: D1539, Model 360 P/N: D1540)
Specifications
OPERATING DETAILS
MODEL 250
Recommended for D3 - D10 tracks.
MODEL 360
Recommended for D3 - D12 tracks.
1. Ram Force
250S/228M Tons
360/328M Tons
2. Ram Speeds - Extend
71.48 IPM *(1)
52.52 IPM *(1)
                          - Retract
128.73 IPM *(1)
78.00 IPM *(1)
3. Distance Between Tool Mounts
30 inches/737 MM
35 inches/889 MM
4. Indexer Speed
80 IPM/2032 MMPM
80 IPM/2032 MMPM
5. Winch Capacity
12,000 Lbs/5454 KG
12,000 Lbs/5454 KG
6. Hold Down Clamp Operating Time
3 seconds (optional)
   3 seconds
CYLINDERS . .
1. Piston Diameter
12 inches
14 inches
2. Stroke
10.0 inches (nominal)
10.0 inches (nominal)
HYDRAULIC SYSTEM . .
1. Fluid Capacity
100 gallons/379 LTRS
100 gallons/379 LTRS
2. Filtration 
10 microns
10 microns
3. Pressure at Full Ram Force
4680 P.S.I./430 Bar
4680 P.S.I./430 Bar
4. Maximum Flow Rate
35 GPM
35 GPM
5. Pumps
Low Noise Gear
Low Noise Gear and Piston
6. Pressure Adjustment Valve
Remote Pilot Valve
Remote Pilot Valve
7. Readout Gauge
Displays in PSI *(1)
Displays in PSI **(2)
8. Valving
***(3)
***(3)
ELECTRICAL . .
1. Voltage
Specify - 208/230/380/460/575
Specify - 208/230/380/460/575
2. Frequency
Specify - 50/60 Hz
Specify - 50/60 Hz
3. Phase
Three
Three
4. Horsepower Power Draw
30 H.P./22.5 KW
30 H.P./22.5 KW
5. Work Light
75 Watt
75 Watt
WEIGHT AND DIMENSIONS . .
1. Dimensions
****(4)
*****(5)
2. Operating Weight
22,000 Lb. 
22,200 Lb. 
3. Shipping Weight
24,200 Lb. 
24,600 Lb. 
4. Shipping Cube
493 Cu. Ft. 
495Cu. Ft. 
Please contact factory for detailed quotation.
All specification are subject to change without notice.
*(1) For faster operation adjustable ram retract positioning and auto-retract  - **(2) PSI  Reading Conversion to tons needed
***(3) All remote electric - ****(4) With indexer Conveyor: 120"w x 176"d x 82"h
*****(5) With indexer Conveyor: 120"w x 176"d x 82"h
(Model 250 Approx. Floor space needed is 10.5' x 60'. This does not include work around space.)
(Model 360 Approx. Floor space needed is 10.5' x 70'. This does not include work around space.)

Our handy Electronic Order/Quote Form

Specification(s) subject to change without notice. Please consult factory where exact details are required.
© Copyright 2006 by WTC Machinery Corp. & Created by Web Centers of America, Inc.