W1222 Linden Road   Ixonia, WI 53036
Phone 1.800.248.8405 or 262.567.3993
Fax 262.569.4850

Model HDC-3, HDC-4 Hydraulic Diagnostic Center
(P/N: 530-241).
 Specification Page
COMPONENT
HDC-3*
HDC-4*
Main Electric Motor
100 h.p. at 1450 rpm
200 h.p. at 1450 rpm
Hydrostaic Pump
7.6 Cu. In.
7.6 Cu. In.
Hydrostatic Motor
7.6 Cu. In.
7.6 Cu. In.
Hydrostatic System Pressue
6000 p.s.i.
6000 p.s.i.
Hydrostatic Motor Speed
0 - 3425 rpm
0 - 3425 rpm
Hydrostatic Motor Torque
150 lb./ft. at 3425 rpm
300 lb./ft. at 3245 rpm
581 lb./ft. at 900 rpm
581 lb./ft. at 1800 rpm
Sump Motor H.P.
4.2 H.P. at 1450 rpm
4.2 H.P. at 1450 rpm
Main Reservoir Capacity
240 gal.
240 gal.
Hydrostatic Reservoir
20 gal.
20 gal.
Oil Supply (Charge System)
53 gpm at 3000 p.s.i.
70 gpm at 3000 p.s.i.
25 gpm at 6000 p.s.i.
50 gpm at 6000 p.s.i.
Pump Test Max Oil Supply
150 gpm
150 gpm
Pump Test Max Pressure
5000 p.s.i.
5000 p.s.i.
Return Lines:  
(1) 2 inch diameter 5000 p.s.i.
150 gpm
150 gpm
(2) 1-1/4 inch diameter 6000 p.s.i.
75 gpm
75 gpm
Charge Flow Outlets:  
(1) Unregulated
6000 p.s.i.
6000 p.s.i.
(1) Regulated
500 - 5000 p.s.i.
500 - 5000 p.s.i.
(1) Regulated
300 - 3000 p.s.i.
300 - 3000 p.s.i.
(2) Regulated
60 - 600 p.s.i.
60 - 600 p.s.i.
Meters:  
(1) Tachometer
0 - 5000 rpm
0 - 5000 rpm
(2) Flowmeter
0 - 13 gpm
0 - 13 gpm
(2) Flowmeter
0 - 158 gpm
0 - 158 gpm 
(1) Temperature (C or F deg.)
0 deg. - 999 deg. range
0 deg. - 999 deg. range
(2) Vacuum
0 - 30 inches hg
0 - 30 inches hg
(1) Pressure 
0 - 60 p.s.i.
0 - 60 p.s.i.
(3) Pressure
0 -100 p.s.i.
0 - 100 p.s.i.
(1) Pressure
0 - 300 p.s.i.
0 - 300 p.s.i.
(5) Pressure
0 - 600 p.s.i.
0 - 600 p.s.i.
(1) Pressure
0 - 3000 p.s.i.
0 - 3000 p.s.i.
(4) Pressure
0 - 7500 p.s.i.
0 - 7500 p.s.i.
Compressed Air Requirement:
Pressure
30 p.s.i.
30 p.s.i.
Volume
2 cfm
2 cfm
Please contact factory for detailed quotation. Please contact factory for detailed quotation.
* All specifications are based on 50Hz electrical source. If users supply is 60 Hz, H.P, rpm and flow
capacity would be increased. Electrical specifications: To customer requirements.
(Approx. Floor space needed is 22' x24'. This does not include work around space.)
Our handy Electronic Order/Quote Form
Specification(s) subject to change without notice. Please consult factory where exact details are required.
© Copyright 2006 by WTC Machinery Corp. & Created by Web Centers of America, Inc.